Flush didn't work....
Manually setting the DNS setting worked....TY Fanra
Flush didn't work....
Manually setting the DNS setting worked....TY Fanra
Likes: (1) |
Loagina (07-15-2014)
|
I flushed my toilet,,,still no log in.
Likes: (1) |
ieaien (07-15-2014)
|
When you change your DNS settings, make sure you reboot your computer. It didn't work for me until I did.
Another suggestion:
try this: open your network and sharing folder, then click your network icon (mine is local area connection) and open that. click on the properties and then on internet protocol version 4 (tcp/ipv4). Now click properties on that.
the bottom part is the dns server. click “use the following DNS server address:
preferred DNS server: 8.8.8.8
alternate dns server 8.8.4.4
click validate settings on exit
Now go to your system tools in your accessories on your start menu and right-click the command prompt. choose “run as administrator”
there you type the ipconfig commands: first the ipconfig /flushdns and then ipcoinfig /registerdns. when it finishes telling you that the dns is registered, close the window.
your eq1 should run then.
oh well I flushed..... but still black/ blank screen
Mbiki